No products
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 above or 25mm above.1.5 ...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 above or optional 2...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 above or 25mm above...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 above or 25mm above...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 above or 25mm above...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole and 1.000 or 25 mm offset abo...
Designed to locate a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole when a magnet is not d...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of standard slotted type bushings.1.5 S...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a threaded hole and 1.000 above or&n...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for a critical height and centerline. The edge may be...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for a critical height and centerline. The edge may be...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for a critical height and centerline. The edge may be...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for a critical height and centerline. The edge ...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for a critical height and centerline. The edge may be...
Used to represent the control side of a groove that is in an automotive grid plate at 1.000 or 25mm above and will clear 3mm by 3mm groove or slot.1.5 GLSM FEATURES: 1144 STEEL, BLACK OXIDE FINISH &nd...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating edges/surfaces. The 1.5ES...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating edges/surfaces.1.5 ESM - ...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating outside corners.1.5 ESM -...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating outside corners.1.5 ESM -...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpse of locating inside corners or radius.N...
Designed to adapt a 1.5 Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory to an Invar Scale Bar.1.5
Adapts to a Theodolite Adaptor to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory in place for a consistant ...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory as a permanent reference point.1.5 LT - RSM FEATURES:...
Used for establishing non-critical temporary or permanent monuments using hot-glue or permanent adhesives.1.5 SM - DN - 3PA FEATURES: ALUMINUM BLACK, HARD ANODIZED COATING• Low cost• Lightwe...
Used for establishing non-critical temporary or permanent monuments using hot-glue or permanent adhesives, and allows for rotation below horizontal.1.5 SMN - DN - 3PA FEATURES: ALUMINUM BLACK, HARD AN...
Used for establishing non-critical temporary or permanent monuments using adhesives or by tack welding.NOTE: We suggest removing the magnet before welding.1.5 SM - DN - 3PS FEATURES: 1144 STEEL, BLACK...
Used for establishing non-critical temporary or permanent monuments using adhesives or by tack welding, and allows for rotation below horizontal.NOTE: We suggest removing the magnet before welding.1.5...
Designed for mounting to a surface to securely hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory. The 1.5SM-H...
Designed for mounting to a surface to securely hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory. The 1.5SM-HC/MB is use...
Designed for adhering to a steel surface to securely hold a Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target ...
Sometimes called a “hockey puck,” the 1.5 SM-TM provides a temporary magnetic SMR adaptor in almost any location on any surface by using hot glue to attach the adaptor temporarily.1.5 SM -...
Allows the SMR to be tracked into a position. A light tap with a hammer will produce a small accuratedly located center punch mark under the SMR location without removing the SMR. Item intended for la...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating center punch marks withou...
Mounted in concrete flooring/foundations, etc., to allow for a permanent 1.5 spherical target reference.1.5 FSM FEATURES: STAINLESS STEEL (standard)SM is a Registered Trademark of Hubbs Machine & ...
Holds a 1.5 inch SMR magnetically to a flat, ferrous surface. It can also hold a Theodolite or Photogrammetry Sphere in some orientations.1.5 SMR / MC FEATURES: ALUMINUM BLACK, ANODIZED COATING...
Designed to adapt a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory to a customer-supplied pole extension (painting...
Designed to achieve the centerline of the Leveling Lug.LLST FEATURES: STAINLESS STEEL WITH 1144 STEEL, BLACK OXIDE INSERT - Heat-treated and hardened to R/C 53 - 55 (standard)LLST APPLICAT...
Adapts a 1.5 Spherically Mounted Retro-Reflector to replace the standard optic 3 1/2” diameter line of sight spherical target.LT - LOSA FEATURES: 1144 STEEL, BLACK OXIDE FINISH - Heat-trea...
Designed to adapt a 1.5 Sphere Mount Nest to .5000 Spherically Mounted Retro-Reflector.1.5 - .5 SMR AD FEATURES: STAINLESS STEEL Heat-treated and hardened to R/C 53 - 55 (standard)...
Designed to adapt a 1.5 Sphere Mount Nest to .8750 Spherically Mounted Retro-Reflector.1.5 - .875 SMR AD FEATURES: STAINLESS STEEL Heat-treated and hardened to R/C 53 - 55 (standard)...
Adapts a Retro-Probe tip to centerline of 1.5000 Sphere to within .00025.NOTE: Nest for probe tip diameter from 1mm to .25001.5 RRS (BALL) FEATURES: STAINLESS STEEL BALL with 17-4 stainless steel inse...
Designed to adapt to a 1.5 Sphere Mount Nest in an inaccessible location using .2500 shank applicable accessories.1.5 HPA FEATURES: STAINLESS STEEL WITH 1144 STEEL, BLACK OXIDE INSERT - Heat-tre...
T1.5S provides same centerline value as a Spherically Mounted Retro-Reflector. This allows interchangeability from Laser Tracker systems to computer-aided Theodolite systems.T1.5S FEATURES: STAINLESS ...
Designed to tether a 1.5 Spherically Mounted Retro-Reflector to the user or Sphere Mount, preventing loss or damage.NOTE: Full set shown at left,drawings show included items in full or partial set.SMR...
Designed to tether a 1.5 Spherically Mounted Retro-Reflector to the user or Sphere Mount, preventing loss or damage.NOTE: Full set shown at left, drawings show included items in full or partial set.SM...
Designed to tether a 1.5 Spherically Mounted Retro-Reflector to the user or Sphere Mount, preventing loss or damage.NOTE: Full set shown at left, drawings show included items in full or partial set.LE...
Designed to tether a 1.5 Spherically Mounted Retro-Reflector to the user or Sphere Mount, preventing loss or damage.NOTE: Full set shown at left, drawings show included items in full or partial set.LE...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of a hole. Use the variable design to c...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory on centerline of standard slotted type bushings.1.5 S...
The Precision Scan Sphere provides the same centerline value as a 1.500” Spherically Mounted Retro-Reflector. This allows interchangeability of targeting from Laser Tracker systems to Laser Scan...
Provides same centerline value as a Spherically Mounted Retro-Reflector. This allows interchangeability from Laser Tracker systems to Photogrammetry or Videogrammetry systems.1.5S FEATURES: HARDENED S...
Provides same centerline value as a Spherically Mounted Retro-Reflector. This allows interchangeability from Laser Tracker systems to Contrast Photogrammetry or Videogrammetry systems.1.5S FEATURES:&n...
Designed to hold a Spherically Mounted Retro-Reflector, Theodolite Sphere, Photogrammetry Sphere, or other Spherical Type Target or Accessory for the purpose of locating edges/surfaces.1.5 ESM - ...
Provides same centerline value as a Spherically Mounted RetroReflector. This allows interchangeability from Laser Tracker systems to Total Station systems.TOTAL 1.5S FEATURES:...
Used for establishing non-critical temporary or permanent monuments using hot-glue or permanent adhesives or it can be bolted on.
The Super Precision Scan Sphere (SPSS) provides the same centerline value as a 1.500” Spherically Mounted Retro-Reflector. The SPSS fits over any 1.5 spherical item to hold the same center within .002”, including a SMR. Diameter held to within .002”. A 1.500 sphere is included with every SPSS. This allows interchangeability of targeting...